Quartz Floor 1300 Concrete Floor Hardener (Dry Shake Hardener)<\/p>\n
Quartz Floor 1300 is a ready-to-use dry powder composed of high-quality cement, graded hard quartz sand, polymer additives, and performance enhancers. It is applied as a dry spray to fresh concrete surfaces to harden concrete floors and increase their resistance to abrasion, impact, and heavy traffic.<\/p>\n
Floors in factories, workshops, and warehouses.<\/p>\n
Floors in parking lots, garages, and truck lanes.<\/p>\n
Floors in service stations and gas stations (areas not exposed to harsh chemicals).<\/p>\n
Warehouses, production facilities, wheelbarrow and forklift driveways.<\/p>\n
Any concrete floor requiring a hard, abrasion-resistant, and easy-to-clean surface.<\/p>\n
High abrasion resistance: Increases the lifespan of the concrete surface and reduces wear and tear from equipment and vehicles.<\/p>\n
Excellent surface hardness thanks to its high-hardness quartz content.<\/p>\n
Dust reduction: Minimizes dust generation from the concrete.<\/p>\n
Synthetic and aesthetically pleasing surface: Provides a smooth or semi-gloss finish depending on the application method.<\/p>\n
Ready to use: No on-site mixing with sand or cement is required.<\/p>\n
Easy cleaning and maintenance: A dense surface reduces oil and dirt absorption.<\/p>\n
Available in several colors (cement gray, dark gray, green, red, etc., as per customer request).<\/p>\n
Economical compared to asphalt or ceramic tile flooring for large areas.<\/p>\n
(Approximate values, subject to adjustment based on your specific requirements)<\/p>\n
Basis: Portland cement + graded quartz sand.<\/p>\n
Grain size: Up to approximately 2\u20133 mm (depending on the design). Apparent density of the powder: Approximately 1.8\u20132.0 kg\/L.<\/p>\n
Approximate consumption:<\/p>\n
Moderate application: 3\u20134 kg per square meter
\nHeavy application: Increases according to the design<\/p>\n
Hardener layer thickness (integrated with the concrete surface): Approximately 2\u20134 mm, depending on the quantity and finishing method.<\/p>\n
1. Use concrete with a suitable strength for flooring (at least C25\u2013C30) with controlled slump.<\/p>\n
2. Ensure proper leveling of the concrete using aluminum leveling vibrators and Tremix, or other available methods.<\/p>\n
3. The surface must be free of segregation and free water pooling, but still in a plastic state to withstand the application of the hardener and the screed without sinking.<\/p>\n
1. Wait until most of the bleed water has evaporated from the concrete surface and the surface has begun to harden (a walkable surface with minimal footprints).<\/p>\n
2. Spray approximately 60% of the total quantity of QUARTZ FLOOR 1300 manually or using a dry sprayer, evenly over the entire surface.<\/p>\n
3. Allow the powder to absorb moisture from the concrete for several minutes until it darkens in color, then incorporate it into the surface using a manganese aluminum float or a rotary helicopter trowel (Power Trowel).<\/p>\n
4. Spray the remaining third (40%) of the quantity, especially on high-stress or under-covered areas.<\/p>\n
5. Re-trowel or use the helicopter again to incorporate the second coat until a smooth surface layer is formed.<\/p>\n
6. After hardening begins, perform final helicopter sanding to achieve the desired smoothness and gloss (light, medium, or high).<\/p>\n
7. Avoid over-smoothing if a non-slip surface is required.<\/p>\n
After the final finish is complete, the surface must be cured immediately to prevent rapid water evaporation with:
\nHARD CURING 4000<\/p>\n
You can use:<\/p>\n
A curing compound suitable for concrete floors, or<\/p>\n
Cover the surface with plastic sheeting or damp burlap for a minimum of 3\u20137 days.<\/p>\n
Proper curing is essential for optimal hardness and abrasion resistance.<\/p>\n
QUARTZ FLOOR 1300 is designed to meet or exceed the requirements of the following standard specifications when applied to concrete conforming to code requirements and with proper installation:<\/p>\n
ASTM C779: Abrasion Resistance of Concrete Floors<\/p>\n
ASTM C944: Surface abrasion resistance of concrete by rotary disc.<\/p>\n
The formula can be adapted for additional tests as required by the project (e.g., dust resistance, impact resistance).<\/p>\n
Packaging: Multi-layer paper bags\/air-sealed kraft bags (25 kg)<\/p>\n
Storage: Store in a dry place, away from moisture and direct sunlight.<\/p>\n
Shelf life: Up to 12 months from the date of production in the original, unopened packaging, under the recommended storage conditions.<\/p>\n
It is recommended to wear gloves, safety glasses, and a dust mask during mixing, spraying, and smoothing.<\/p>\n
Avoid prolonged contact with eyes or skin. In case of contact, rinse immediately with plenty of water or consult a doctor. Keep out of reach of children or consult a physician.<\/p>\n","protected":false},"excerpt":{"rendered":"
Quartz Floor 1300 Concrete Floor Hardener (Dry Shake Hardener) 1. Product Description Quartz Floor 1300 is a ready-to-use dry powder composed of high-quality cement, graded hard quartz sand, polymer additives, and performance enhancers. It is applied as a dry spray to fresh concrete surfaces to harden concrete floors and increase their resistance to abrasion, impact, […]<\/p>\n","protected":false},"featured_media":1661,"template":"","meta":[],"product_brand":[],"product_cat":[38],"product_tag":[],"class_list":{"0":"post-1660","1":"product","2":"type-product","3":"status-publish","4":"has-post-thumbnail","6":"product_cat-products","8":"first","9":"instock","10":"shipping-taxable","11":"product-type-simple"},"yoast_head":"\n