product Details

Description

Hard Release 1200: Powder Release Agent for Stamped Concrete

General Description

Hard Release 1200 Powder Release Agent is a high-quality mineral compound specifically designed to reduce friction and prevent stamping molds from sticking to the concrete surface during the printing process. The material acts as a separator between the mold and the concrete surface, ensuring a clear, even, and precise imprint, while improving the final visual effect by adding depth and shading to the flooring.

Main Components

1. Fine mineral powder: facilitates separation between molds and the concrete surface.

2. Colored pigments: high quality, UV-resistant, providing consistent and durable shades.

3. Anti-caking agents: ensure smooth and easy flow of the material during application.

Technical Specifications

Color: available in a wide range of standard and custom colors.
Particle size: fine powder that ensures even distribution on the surface.
Bulk density: approx. 1.2 g/cm³.
Weather resistance: resistant to UV rays, moisture, and heat.
Compatibility: compatible with all stamped concrete systems.

Key Advantages

1. Easy release: ensures smooth mold separation without damaging the surface.

2. High aesthetics: adds three-dimensional depth and natural shading to the patterns.

3. Time saving: reduces effort required to clean the molds.

4. Abrasion resistance: protects patterns and colors from fading due to environmental factors.

5. Multi-application: suitable for a wide range of indoor and outdoor uses.

Application

1. Surface preparation:
   Level and smooth the stamped concrete surface properly.
   Ensure the surface is clean and free of oils or contaminants.

2. Applying the release powder:
   Using a brush or by hand, spread the release agent evenly over the fresh concrete surface.
   The material must be applied uniformly to cover the entire area.

3. Stamping:
   Place the stamping molds directly on the concrete and press gently with a tamper.
   Apply suitable pressure to form the texture without moving the powder.

4. Cleaning:
   After the concrete dries (24–48 hours), clean the surface with a soft brush or low-pressure water spray to remove excess powder.
   For a consistent appearance, a sealer can be applied (Crystal Seal 600 Sealer).

Ideal Uses

Garden walkways and paths.
Public squares and open areas.
Driveways and parking entrances.
Industrial and commercial areas.
Swimming pools and resorts.

Packaging and Storage

Packaging: available in plastic containers or sealed bags of 10 kg or 20 kg.
Shelf life: two years under proper storage conditions.

Storage conditions:
Store in a dry, shaded place.
Avoid direct exposure to moisture or water.

Available Colors

Grey, beige, brown, terracotta red, black, and custom colors upon request.
Can be blended to create artistic effects.

Health and Safety Precautions

1. Wear gloves, safety goggles, and a face mask during application.

2. If contacted with skin or eyes, wash thoroughly with water.

3. Do not inhale the dust produced from the material.

4. Keep out of reach of children.

Standards and Conformity ASTM

Complies with ASTM C979 standard for colored pigments.